Display[:Window[1]|2]:Format <Character_Data> - Agilent Technologies EPM-P Series Programming Manual

DISPlay Subsystem
DISPlay[:WINDow[1]|2]:FORMat <character_data>
DISPlay[:WINDow[1]|2]:FORMat <character_data>
This command selects the format of the selected window.
Syntax
DISP
Parameters
Item
character_data
Example
DISP:WIND2:FORM DIG
5-14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:WIND 1 :FORM
2
Description/Default
Sets the window format:
• DIGital: sets the window display to
digital. This setting is the same as
SNUMeric.
• ANALog: sets the window display to
analog using the currently SELected
measurement.
• SNUMeric: sets the window display
to single numeric. The currently
SELected measurement is displayed.
This setting is the same as DIGital.
• DNUMeric: sets the window display
to dual numeric.
• TRACe: trace display using the
currently SELected measurement.
Used to determine the channel from
which the trace will be taken.
EPM-P Series Power Meters Programming Guide
Space
character_data
?
Range of Values
DIGital
ANALog
SNUMeric
DNUMeric
TRACe
This command sets the lower
window to a digital display.