Memory:catalog Commands - Agilent Technologies EPM-P Series Programming Manual

MEMory Subsystem

MEMory:CATalog Commands

MEMory:CATalog Commands
These commands are used to query information on the current contents of
a power meter's:
•
•
•
The following commands are detailed in this section:
MEMory:CATalog[:ALL]?
MEMory:CATalog:STATe?
MEMory:CATalog:TABLe?
7-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Sensor calibration tables (8480 Series power sensors and N8480
Series sensors with Option CFT only).
Frequency dependent offset tables.
Save/recall registers.
EPM-P Series Power Meters Programming Guide