Agilent Technologies EPM-P Series Programming Manual page 551

Reset Condition
On reset, TRIGger:DELay:AUTO is set to ON.
Query
TRIGger:DELay:AUTO?
The query enters a 1 or 0 into the output buffer indicating the status of
TRIGger:DELay:AUTO.
•
•
Query Example
TRIG:SEQ2:DEL:AUTO?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
TRIGger[:SEQuence[1]|2]:DELay:AUTO <boolean>
1 is returned when it is ON.
0 is returned when it is OFF.
TRIGger Subsystem
This command queries the
settling-time delay of channel B.
13-35