Agilent Technologies EPM-P Series Programming Manual page 227

CALCulate Subsystem
CALCulate[1]|2|3|4:LIMit Commands
CALCulate[1]|2|3|4:LIMit Commands
These commands set the limits on both the upper and lower
windows/measurements enabling you to:
•
•
•
•
The following commands are detailed in this section:
CALCulate[1]|2|3|4:LIMit:CLEar:AUTo <boolean>
CALCulate[1]|2|3|4:LIMit:CLEar[IMMediate]
CALCulate[1]|2|3|4:LIMit:FAIL?
CALCulate[1]|2|3|4:LIMit:FCOunt?
CALCulate[1]|2|3|4:LIMit:LOWer[:DATA]
CALCulate[1]|2|3|4:LIMit:UPPer[:DATA]
CALCulate[1]|2|3|4:LIMit:STATe <boolean>
3-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Set upper and lower level limits.
Query if there has been a failure.
Count the number of failures.
Clear the counter.
EPM-P Series Power Meters Programming Guide