Agilent Technologies EPM-P Series Programming Manual page 376

Example
SENS2:CORR:GAIN1
Reset Condition
On reset, CFACtor|GAIN1 is set to 100%.
Query
[SENSe[1]]|SENSe2:CORRection:CFACtor|GAIN[1][:INPut][:MAGNitude]? [MIN|MAX]
The query returns the current gain correction setting or the values
associated with MIN and MAX.
Query Example
CORR:GAIN1?
Error Messages
The SENSe[1]]|SENSe2:CORRection:CFACtor|GAIN1 command can
be used for the 8480 Series power sensors and N8480 Series power sensors
with Option CFT when no sensor calibration table has been set up. If a
sensor calibration table is selected the error -221, "Settings Conflict"
occurs.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SENSe[1]]|SENSe2:CORRection:CFACtor|GAIN[1][:INPut][:MAGNitude]
SENSe Subsystem
This command sets a gain
correction of 100% for channel B.
This command queries the current
calibration factor setting for
channel A.
9-23