Memory:clear[:Name] <Character_Data> - Agilent Technologies EPM-P Series Programming Manual

MEMory:CLEar[:NAME] <character_data>
This command clears the contents of a specified sensor calibration table
(8480 Series power sensors and N8480 Series sensors with Option CFT
only), frequency dependent offset table, or save/recall register.
Although the table remains, a
MEMory:TABLe:FREQuency|GAIN:POINts? query returns a 0 as there
are no contents in the table.
For sensor calibration tables and frequency dependent offset tables, this
command is an alternative form of the MEMory:CLEar:TABLE command,
the only difference being the method in which the table is selected.
Note The contents cleared using this command are non-recoverable.
Syntax
MEM
Parameters
Item
character_data
Example
MEM:CLE "HP8485A"
Error Messages
If the table or save/recall register name does not exist, error -224, "Illegal
parameter value" occurs.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MEMory:CLEar[:NAME] <character_data>
Space
:CLE :NAME
Description/Default
Contains an existing table name or
save/recall register.
MEMory Subsystem
character_data
Range of Values
Any existing table
name or save/recall
register.
This command clears the contents
of sensor calibration table
HP 8485A
7-11