Memory:clear Commands - Agilent Technologies EPM-P Series Programming Manual

MEMory Subsystem

MEMory:CLEar Commands

MEMory:CLEar Commands
These commands are used to remove the contents stored in the sensor
calibration tables (8480 Series power sensors and N8480 Series sensors
with Option CFT only), frequency dependent offset tables and save/recall
registers. This subsystem removes the data contents but does not affect
the name of the associated table or save/recall register.
The following commands are detailed in this section:
MEMory:CLEar:[NAME] <character_data>
MEMory:CLEar:TABLe
Note The contents cleared using these commands are non-recoverable.
7-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
EPM-P Series Power Meters Programming Guide