Agilent Technologies EPM-P Series Programming Manual page 614

IEEE488.2 Command Reference
*TRG
*TRG
The *TRG (TRiGger) command triggers all channels that are in the
wait for trigger state. It has the same effect as Group Execute Trigger
(GET).
Using the *DDT command may change the function of the *TRG command.
Syntax
*TRG
Error Message
• If TRIGger:SOURce is not set to BUS, error -211, "Trigger ignored"
occurs.
• If the power meter is not in the wait-for-trigger state, error -211,
"Trigger ignored" occurs.
16-22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
EPM-P Series Power Meters Programming Guide