Installing The Cisco Ons 15540 - Cisco ONS 15540 ESP Hardware Installation Manual

Installing the Cisco ONS 15540

This chapter describes the installation procedures for the Cisco ONS 15540
chassis and its components. This chapter includes the following sections:
•
•
•
•
•
•
•
•
•
•
Before you install, operate, or service the system, read the
Note
and Safety Information for the Cisco ONS 15540 ESP
information you should know before working with the system.
During this procedure, wear grounding wrist straps to avoid ESD damage to the
Warning
card. Do not directly touch the backplane with your hand or any metal tool, or
you could shock yourself.
78-15095-01
Before Installing, page 2-2
Rack-Mounting the Shelf, page 2-4
Grounding the Shelf, page 2-8
Installing the Shelf, page 2-6
Installing Strain Relief Brackets, page 2-11
Installing and Removing Motherboards and Processor Cards, page 2-13
Installing and Removing Modules, page 2-16
Installing and Removing the Fan Assembly, page 2-25
Powering Up the Shelf, page 2-26
Using Y-Cable, page 2-37
C H A P T E R
Cisco ONS 15540 ESP Hardware Installation Guide
2
Regulatory Compliance
for important safety
2-1