LUBRICATION (1GR−FE)
INSTALLATION
1.
INSTALL OIL FILTER BRACKET
(a)
Install a new O−ring and oil filter bracket with the 2 nuts
and 3 bolts.
Torque: 19 N m (194 kgf cm, 14 ft lbf)
(b)
Connect the lower radiator hose.
2.
INSTALL OIL COOLER
(a)
Clean the contact surface of the oil filter bracket with the
cooler mounting.
(b)
Place a new O−ring on the oil cooler.
(c)
Apply a light coat of engine oil to the threads of the union
bolt.
(d)
Install the oil cooler and plate washer with the union bolt.
Torque: 68 N m (693 kgf cm, 50 ft lbf)
(e)
Connect the 2 oil cooler hoses to the oil cooler.
3.
INSTALL OIL FILTER
4.
ADD ENGINE COOLANT
5.
ADD ENGINE OIL
6.
INSTALL V−BANK COVER
A23142
−
OIL COOLER
LU−19
LU0QI−01