CO−18
COOLING (2UZ−FE)
−
RADIATOR
INSTALLATION
1.
INSTALL NO.1 FAN SHROUD
Install the No.1 fan shroud with the 4 bolts.
Torque: 5.0 N·m (50 kgf·cm, 44 in.·lbf)
2.
INSTALL RADIATOR ASSEMBLY
(a)
Set the radiator bracket hooks to the radiator support
holes.
(b)
Install the 4 bolts.
Torque: 12 N·m (120 N·m, 9 ft·lbf)
3.
INSTALL NO.2 FAN SHROUD
Install the No.2 fan shroud with the 2 clips.
4.
CONNECT A/T OIL COOLER HOSES TO RADIATOR
5.
CONNECT UPPER RADIATOR HOSE TO RADIATOR
B07220
6.
CONNECT LOWER RADIATOR HOSE TO RADIATOR
7.
CONNECT RADIATOR RESERVOIR HOSE TO RADIA-
TOR
8.
FILL WITH ENGINE COOLANT
9.
START ENGINE AND CHECK FOR ENGINE COOLANT
LEAKS
10.
RECHECK ENGINE COOLANT LEVEL
11.
INSTALL ENGINE UNDER COVER
CO0UY−05