Digital Operator, Communications Connector, And Internal Layout For Control Panel - YASKAWA FSDrive-MV1000 Series Instructions For Use Manual

u Digital Operator, Communications Connector, and Internal Layout for Control Panel
Figure 1.13
A – Serial communications connector
B – USB connector
C – Serial communications connector
Figure 1.13 Digital Operator and Communications Connector for Control Panel
Figure 1.14
The drive is composed of the following three elements:
• Transformer panel
• Power Cell panel
• Control panel
Note: A digital operator for reading and writing parameter settings and monitoring status and faults, and a USB connector for
DriveWizard Plus MV communications are provided on the control panel door. Refer to
for details on the names and functions of the digital operator controls.
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions
A
B
C
for drive
for PLC option
C D
A
B
C
E
Cross section
A – Control board
B – Relay board
C – Contactor and relay
D – Relay board (option)
E – Option board
F – Fan Fault Detection board
Figure 1.14 Internal Layout for Control Panel
1.4 Component Names and Configurations
D
D – Selector switch
E – Digital operator
G
H
J
I
G
F
Front view
G – Noise filter
H – Current sensor board (option)
I – DC power supply
J – Circuit breaker
K – Pull-out handle
Using the Digital Operator on page 109
E
K
1
35