Debug Arp - Dell 8 Command Reference Manual

debug arp

Displays the ARP traffic.
Synopsis debug arp [interface interface-type interface-number] {[count tx | rx]}
Operands interface
count
Description Use this command to display the ARP traffic, for all interfaces or a specific interface.
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
User Guidelines There are no usage guidelines for this command.
Example none
See Also none
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Displays the ARP traffic for the specified interface only.
interface-type Network interface type (external TenGigabitEthernet interface, null,
port-channel, or VLAN).
interface-number
Layer-2 or layer-3 Interface number.
Stops display after display count packets.
tx Counts only transmitted packets.
rx Counts only received packets.
5
debug arp
81