Charging Wire; Outline; Removing The Wire Cleaner Of The Primary Charging Assembly - Canon ImageRunner 600 Service Manual

CHAPTER 6 IMAGE FORMATION SYSTEM
C.

Charging Wire

1.

Outline

The primary, pre-transfer, and transfer/
separation charging wire are used around the
photosensitive drum, each of a 0.06mm diam-
eter.
2. Removing the Wire Cleaner of the
Primary Charging Assembly
1) Move the clip mount [1] to the rearmost
position, and remove the screw [2] to de-
tach the support plate [4] of the wire
cleaner motor shaft [3]; then, take out the
clip mount [1] through the opening in the
shielding plate [5] together with the wire
cleaner motor shaft [3].
2) Pick the wire cleaner with radio pliers,
and release the hook with your fingers.
6-60
COPYRIGHT © 1999 CANON INC.
Cut-off
[3]
Figure 6-C701
Figure 6-C702
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[1]
[2] [4]
Cut-off
[5]