Pickup Retry - Canon iR1600 Series Service Manual

Hide thumbs Also See for iR1600 Series:

Table of Contents

CHAPTER 6 PICKUP/FEDING SYSTEM

2.1.3 Pickup Retry

If paper is not picked up despite the rotation of the pickup roller, the machine will ex-

ecute a retry operation. The DC controller PCB keeps count of the time starting when the

cassette pickup solenoid (SL151) goes ON. If the retry sensor (PS152) does not detect the

leading edge of paper within a specific period of time, the machine will turn on the cas-

sette pickup solenoid once again for a pickup retry.

If the retry sensor does not detect the leading edge of paper within a specific period of

time after executing a retry pickup twice, the machine will identify the condition as a jam,

and will indicate a jam message on the LCD in the control panel.

• Sequence of Operation for a Pickup Retry

Cassette pickup

Retry sensor

Start key ON or

print signal input

(L=specific time)

CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002

Show Quick Links

Table of Contents

Ir2010 series Ir2000 series Ir1610 series