NEC Univerge sv8500 Manual page 1821

MG-SIP128 [MG-128SIPMGJ] How to download a WAVE file
If you select Type3 (WAVE file) for the music type of "set musictype" command, you can use a WAVE file
for music on hold. Note that the payload type of the RTP header sent by MG-SIP128 [MG-128SIPMGJ] must
be G.711.
The following explains how to download a WAVE file.
• Place the firmware of MG-SIP128 [MG-128SIPMGJ] in a folder on a TFTP server. If the firmware is
not present, create a folder with the name of the MG-SIP128 firmware ("SP4032" in this case) in a
folder on the server, and then create a subfolder named "MUSIC" to store WAVE files. A WAVE file
must be named as "music_3.wav".
• Place the WAVE file in the MUSIC folder (a subfolder of the above-mentioned firmware folder).
• Form the download-list file (mgsipmwlist.txt) under the firmware folder as below.
# This is Firmware list for SN8178
00,SP4032/MUSIC/music_3.wav,0
Note: When adding WAVE files to the download-list (mgsipmwlist.txt), assign sequential numbers (such
as 00, 01, 02,...) to all files as shown in the red frame in the image above.
Directory tree
Any Folder
mgsipmwlist.txt
TFTP Server software
SP4032 * Folder containing MG-SIP128 [MG-128SIPMGJ] firmware
MUSIC
* Download-list file, which lists download file names
* TFTP server software for download, which you need to prepare
VOL.2-1568
* Folder to store WAVE files
MG-SIP128 [MG-128SIPMGJ]