NEC Univerge sv8500 Manual page 1815

download
This command is used to download MG-SIP128 [MG-128SIPMGJ] program, Music/Tone file, and Multipoint
data via Ether1 port (Ether port on the LAN side).
The following figure shows an example of a display.
[When downloading all programs]
MG(SIP) > download
--- Download menu ---
Download of all programs. (default) ---
input:1
Download of one program. --- input:2
Quit --- [Q/q]
Input:1
--- IP Address setting of MG(SIP) ---
Select Ether Port [1(Ether1)/2(Ether2)/
Q(quit)]:1
Current IP Address of MG(SIP):10.41.1.100
Do you change IP Address of MG(SIP)?
[Y(change)/N(current)/Q(quit)]:y
If you want to return to the previous step,
please input 'Q'.
Input new IP Address:172.16.253.100
Current Subnet mask of MG(SIP):255.0.0.0
Do you change Subnet mask of MG(SIP)?
[Y(change)/N(current)/Q(quit)]:y
If you want to return to the previous step,
please input 'Q'.
Input new Subnet mask:255.255.0.0
--- IP Address setting of TFTP server ---
VOL.2-1562
MG-SIP128 [MG-128SIPMGJ]
Input "download" at the configuration
mode.
To download all programs, enter "1".
Select a port to use.
(With the default setting, select Ether1.
If selecting Ether2, using two ports
must be set in the "set ipaddress" com-
mand.)
To change the IP address that is used
for downloading, enter "y".
Enter the IP address.
To change the subnet mask of the
selected port, enter "y".
Enter a subnet mask.