NEC Univerge sv8500 Manual page 1828

Do you change IP Address of TFTP server?
[Y(change)/N(current)/Q(quit)]:y
If you want to return to the previous step,
please input 'Q'.
Input new IP Address:172.nn.nnn.nnn
IP Address change was completed.
New IP Address of MG(SIP):172.yy.yyy.yyy
New Subnet mask of MG(SIP):255.255.0.0
New IP Address of TFTP server:172.nn.nnn.nnn
Are these IP Address correct? [Y(correct)/
N(change)/Q(quit)]
mp_data.csv upload...
tftpUpload:User file TFTP start.
Send.
Upload was completed!
The following lists causes and solutions of error codes.
Error
Error Display
Code
NONE File not found
2 Access violation
Cause of Error
No multipoint data file (mp_data.csv),
or no CONFIG folder
No access permission
VOL.2-1575
MG-SIP128 [MG-128SIPMGJ]
Enter an IP address.
When the specified IP addresses are
correct, enter 'y'.
Troubleshooting
Assign "set mp_data" command.
Check the TFTP server settings.