Free Wheel Hub - Toyota 1986 Landcuiser Repair Manual

FRONT AXLE ANO SUSPENSION - Free Wheel Hub
ASSEMBLY OF FREE WHEEL HUB
(See page FA-6)
FA·9
1. APPLY MP GREASE TO SLI DING SURFACE OF PARTS
2. INSTALL CONTRO L HANDLE TO COV ER
(a) Install the seal, spring and steel ball to the handle.
(b) Insert the handle in the cover and install the snap ring
with snap ring plie~.
3. INSTA LL TENSION SPR ING I N CLUTCH
Install the tension spring in the clutch with the spring end
aligned with the initial groove.
4. INSTALL FOLLOWER PAWL TO CLUTCH
(a) Place the follower pawl on the tension spring with
one of the large tabs against the bent spring end.
(b)
Place the top ring of the spring on the small tabs.
5. INSTALL CLUTCH A ND SPRIN G INTO COVER
(a) Place the spring between the COller and clutch wi th
the large spring end toward the COller.
(b) Compress the spring and install the clutch with the
pawl tab fit to the handle cam.