Per-Port Qos Commands - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.16.0
Related service-class dot1p-mapping
Commands

Per-Port QoS Commands

Per-port QoS (port-based QoS) allows you to define the QoS configuration on a per-physical-port basis.
dot1p-priority
Assign a value to the IEEE 802.1p bits on the traffic this interface receives.
Z9500
Syntax
dot1p-priority priority-value
To delete the IEEE 802.1p configuration on the interface, use the no dot1p-
priority command.
Parameters
priority-value
Defaults none
1482
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
— Identifies the class map.
Enter a value from 0 to 7.
dot1p Queue Number
0 2
1 0
2 1
3 3
4 4
5 5
6 6
7 7
Quality of Service (QoS)