Banner Motd - Dell Force10 Z9000 Reference Manual

Command History
Version 8.3.11.1
Version 8.2.1.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage A login banner message is displayed only in EXEC Privilege mode after entering the enable
Information command followed by the password. These banners are not displayed to users in EXEC mode.
Example
FTOS(conf)#banner login ?
keyboard-interactive Press enter key to get prompt
LINE c banner-text c, where 'c' is a delimiting character
FTOS(conf)#no banner login ?
keyboard-interactive Prompt will be displayed by default
<cr>
FTOS(conf)#banner login keyboard-interactive
Enter TEXT message. End with the character '%'.
This is the banner%
FTOS(conf)#end
FTOS#exit
13d21h9m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated
for user on line console
This is the banner
FTOS con0 now available
Press RETURN to get started.
13d21h10m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful
for user on line console
This is the banner
FTOS>
Related

banner motd

Commands
exec-banner
banner motd
Set a message of the day (MOTD) banner.
C-Series, E-Series, S-Series, Z-Series
Syntax banner motd c line c
Parameters
c
100
Introduced on the Z9000.
Introduced the keyword keyboard-interactive.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command
– sets a Message of the Day banner.
– enables the display of a text string when you enter EXEC mode.
Enter a delineator character to specify the limits of the text banner.
The delineator is a percent character (%).