Upgrade Fpga-Image - Dell Force10 Z9000 Reference Manual

may *
* cause a board RMA. Proceed with caution ! *
***********************************************************
Restore fpga image for linecard 4 [yes/no]: yes
FPGA restore in progress. Please do NOT power off the card.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Upgrade result :
================
Linecard 4 FPGA restore successful.
Usage Reset the card using the power-cycle option after restoring the FPGA command.
Information
Related reset
Commands

upgrade fpga-image

Upgrade the primary FPGA image.
C-Series
Syntax upgrade fpga-image {rpm {number | all}| linecard {number | all}
[system-fpga | link-fpga] | all} {booted | file-url}
Parameters
rpm
linecard
all
system-fpga
link-fpga
booted
94
– resets a card.
number
Enter the keyword rpm followed by the RPM slot number to upgrade
an RPM FPGA The range is 0 to 1.
number
Enter the keyword linecard followed by the line card slot number
to upgrade a linecard FPGA. The range is 0 to 7 on the C300 and 0 to 3
on the C150.
Enter the keyword all to upgrade all RPM and linecard FPGAs.
Enter the keyword all after the keyword rpm to upgrade all FPGAs
on all RPMs.
Enter the keyword all after the keyword linecard to upgrade all
FPGAs on all linecards.
(OPTIONAL) Enter the keywords system-fpga to upgrade only the
system FPGA on a fiber linecard.
NOTE: Contact Dell Force10 TAC before using this keyword.
(OPTIONAL) Enter the keywords link-fpga to upgrade only the
link FPGA on a fiber linecard.
NOTE: Contact the Dell Force10 TAC before using this keyword.
Upgrade the FPGA image using the currently running FTOS image.