ip ftp username
Assign a user name for outgoing FTP connection requests.
C-Series, E-Series, S-Series, Z-Series
Syntax
ip ftp username username
To return to anonymous FTP connections, use the no ip ftp username [username]
command.
Parameters
username
Defaults
No user name is configured.
Command Modes
CONFIGURATION
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage
You must also configure a password with the ip ftp password command.
Information
Related
ip ftp password
Commands
ip telnet server enable
Enable the Telnet server on the switch.
C-Series, E-Series, S-Series, Z-Series
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults
Enabled
Command Modes
CONFIGURATION
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
118
Enter a text string as the user name up to 40 characters long.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
– sets the password for FTP connections.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.