Show Ethernet-Switching Layer2-Protocol-Tunneling Interface - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show ethernet-switching layer2-protocol-tunneling interface

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 156: show ethernet-switching layer2-protocol-tunneling interface Output Fields
Field Name Field Description
Name of an interface on the switch.
Interface
Type of operation being performed on the interface. Values are
Operation
State of the interface. Values are
State
If the interface state is
Description
means that the interface is an access interface that has received L2PT-enabled PDUs. Access interfaces should
not receive L2PT-enabled PDUs. This scenario might mean that there is a loop in the network.
show show
ethernet-switching ethernet-switching
layer2-protocol-tunneling layer2-protocol-tunneling
interface interface
1234
show ethernet-switching-layer2-protocol-tunneling interface
<interface-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about Layer 2 protocol tunneling (L2PT) on interfaces that have
been configured for L2PT.
none —Display L2PT information about all interfaces on which L2PT is enabled.
interface-name —(Optional) Display L2PT information for the specified interface.
view
show ethernet-switching layer2-protocol-tunneling statistics on page 1236
show ethernet-switching layer2-protocol-tunneling vlan on page 1239
Configuring Layer 2 Protocol Tunneling on J-EX Series Switches (CLI Procedure) on
page 1150
show ethernet-switching layer2-protocol-tunneling interface on page 1234
show ethernet-switching layer2-protocol-tunneling interface ge-0/0/0.0 on page 1235
Table 156 on page 1234 lists the output fields for the
layer2-protocol-tunneling interface
order in which they appear.
active
, displays why the interface is shut down. If the description says
shutdown
user@switch> show ethernet-switching layer2-protocol-tunneling interface
Layer2 Protocol Tunneling information:
Interface Operation
ge-0/0/0.0 Encapsulation
show ethernet-switching
command. Output fields are listed in the approximate
Encapsulation
and .
shutdown
State Description
Shutdown Shutdown threshold exceeded
and .
Decapsulation
Loop detected
, it