Clear Line; Configure - Dell Force10 Z9000 Reference Manual

clear line

Reset a terminal line.
C-Series, E-Series, S-Series, Z-Series
Syntax clear line {line-number | aux 0 | console 0 | vty number}
Parameters
line-number
aux 0
console 0
vty number
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series

configure

Enter CONFIGURATION mode from EXEC Privilege mode.
C-Series, E-Series, S-Series, Z-Series
Syntax configure [terminal]
Parameters
terminal
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.1.1.0
Enter a number for one of the 12 terminal lines on the system. Range:
0 to 11.
Enter the keywords aux 0 to reset the auxiliary port.
NOTE: This option is supported on the E-Series only.
Enter the keywords console 0 to reset the console port.
Enter the keyword vty followed by a number to clear a terminal line.
Range: 0 to 9.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
(OPTIONAL) Enter the keyword terminal to specify that you are
configuring from the terminal.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
103