Banner Login - Dell Force10 Z9000 Reference Manual

Usage Optionally, use the banner exec command to create a text string that is displayed when you
Information access EXEC mode. The exec-banner command toggles that display.
Example
FTOS(conf)#banner exec ?
LINE c banner-text c, where 'c' is a delimiting character
FTOS(conf)#banner exec %
Enter TEXT message. End with the character '%'.
This is the banner%
FTOS(conf)#end
FTOS#exit
4d21h5m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated
for user on line
console
This is the banner
FTOS con0 now available
Press RETURN to get started.
4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for
user on line
console
This is the banner
FTOS>
Related

banner login

Commands
banner motd
exec-banner
line
banner login
Set a banner to be displayed when logging on to the system.
C-Series, E-Series, S-Series, Z-Series
Syntax banner login {keyboard-interactive | no keyboard-interactive}
[c line c]
Parameters
keyboard-
interactive
c
line
Defaults No banner is configured and the CR is required when creating a banner.
Command Modes CONFIGURATION
– sets a banner for login connections to the system.
– sets a Message of the Day banner.
– Enables the display of a text string when you enter EXEC mode.
– enables and configures the console and virtual terminal lines to the system.
Enter the keyword keyboard-interactive to require a
carriage return (CR) to get the message banner prompt.
Enter a delineator character to specify the limits of the text banner.
The delineator is a percent character (%).
Enter a text string for your text banner message ending the message
with your delineator. The delineator is a percent character (%).
Range: maximum of 50 lines, up to 255 characters per line
99