Copy - Dell Force10 Z9000 Reference Manual
Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)
Hide thumbs
Also See for Force10 Z9000:
- Configuration manual (984 pages) ,
- Manual (56 pages) ,
- Quick start manual (25 pages)
Table of Contents
Advertisement
Usage
A system message appears stating that the bootflash image has been changed. You must
Information
reload the system before the system can switch to the new bootflash image.
copy
Copy one file to another location. FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the
C-Series, E-Series, S-Series
Syntax
copy source-file-url destination-file-url
Parameters
Enter the following location keywords and information:
file-url
64
To copy a file
enter flash:// followed by the filename
from the internal
FLASH
To copy a file on
enter ftp://
an FTP server
user:password@hostip/filepath
To copy a file
enter rpm0flash://filepath
from the internal
FLASH on RPM0
To copy a file
enter rpm0slot0://filepath
from the external
FLASH on RPM0
To copy a file
enter rpm1flash://filepath
from the internal
FLASH on RPM1
To copy a file
enter rpm1slot0://filepath
from the external
FLASH on RPM1
To copy the
enter the keyword running-config
running
configuration
To copy the
enter the keyword startup-config
startup
configuration
To copy using a
enter the keyword scp:
Secure Copy
(SCP),
•
If you enter scp: in the source
position, enter the target URL;
•
If you enter scp: in the target
position, first enter the source URL;
hostip field).
Advertisement
Table of Contents
