Copy Running-Config Startup-Config; Delete - Dell Force10 Z9000 Reference Manual

Version 7.5.1.0
Version 6.1.1.0
Usage In this streamline copy command, the source image is copied to the primary RPM and
Information
then, if specified, to the standby RPM. After the copy is complete, the new image file path on
each RPM is automatically configured as the primary image path for the next boot. The current
system image (the one from which the RPM booted) is automatically configured as the
secondary image path.
FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP.

copy running-config startup-config

Copy running configuration to the startup configuration.
C-Series, E-Series
Syntax copy running-config startup-config {duplicate}
Command Modes EXEC Privilege
Command History
Version 7.5.1.0
Version 6.3.1.0
Usage This command is useful for quickly making a changed configuration on one chassis available
Information on external flash in order to move it to another chassis.
When you use the copy running-config startup-config duplicate command
to copy the running configuration to the startup configuration, FTOS creates a backup file on
the internal flash of the startup configuration.

delete

Delete a file from the flash. After deleted, files cannot be restored.
C-Series, E-Series, S-Series
Syntax delete flash-url [no-confirm]
Parameters
flash-url
Introduced on the C-Series
Introduced
NOTE: The keywords boot-image, synchronize-rpm, and external are used on
the Primary RPM only.
Introduced on the C-Series
Introduced
Enter the following location and keywords:
67