Avaya DEFINITY Server CSI Maintenance Manual page 95

Troubleshooting Features
Field descriptions
Port address: PCSSpp (cabinet-carrier-slot-circuit)
Port
Name of maintenance object
Maintenance Name
The actual test that was run.
Test Number
Test result: Pass, Fail, Abort
Test Result
Numeric code explaining why the release failed or aborted. Refer to
Error Code
the detailed list of the codes by test number for each MO or see the
ISDN Trunk Maintenance documentation for details.
The functions of clear, list, and status commands associated with the ISDN
Testcall are:
clear isdn-testcall <grp>/<mbr> enables you to cancel an in-progress
ISDN-PRI test call and allow another test call to start. See
isdn-testcall'' on page
list isdn-testcall <grp>/<mbr> enables you to list all the ISDN-PRI trunks
in use for an ISDN-PRI test call in the system. See
341.
status isdn-testcall <grp>/<mbr no> [minutes] enables you to check on
the progress of an outgoing test call. When an outgoing ISDN-PRI test call
completes in a specific port network, another ISDN-PRI trunk from the
same port network is available for testing, regardless of whether the status
information has been displayed. For details on this command, see
isdn-testcall'' on page
Troubleshooting the Outgoing ISDN-Testcall
Command
If the TestCall BCC field appears on the Trunk Group Administration screen, the
TestCall BCC field must show the correct BCC for the service provisioned on the
ISDN-PRI trunk. The TestCall BCC values are:
0—Voice
1—Digital Communications Protocol Mode 1
2—Mode 2 Asynchronous
3—Mode 3 Circuit
4—Digital Communications Protocol Mode 0 (usually the default).
NOTE:
If the ISDN-PRI trunk is of type "cbc," make sure the TestCall Service field
on the Trunk Group Administration screen indicates the correct service so
that a network facility message can be sent across the ISDN-PRI network
555-233-119
197.
487.
''clear
''list testcalls'' on page
''status
Issue 5 October 2002
95