Avaya DEFINITY Server CSI Maintenance Manual page 71

System Backup
save translation
Processor
SPE-A
Command successfully completed
Screen 12. Save Translation screen
4. Verify that the command successfully completes. If not, an error message
appears. Seethe "Translation Card Errors" section.
5. If the system is equipped with a TN750 Announcement circuit pack, type
save announcement and press
The following appears:
save announcements
Processor
SPE-A
Command successfully completed
Screen 13. Save Announcements screen
6. Verify that the command successfully completes. If not, an error message
appears. In such a case, see
7. Remove the backup translation card and insert the original translation card.
8. Label the backup translation card with the date and time it was updated.
9. Store the backup translation card in a secure place.
Translation Card Errors
Translation card-related failures may be the fault of the card or the Processor
circuit pack. The following is a list of the error messages and recommended
responses to each.
1. Cannot access file storage area—Implies that the wrong
translation card may be installed.
Response: Check to see which translation card is installed. If the correct
one is installed, use test card-mem to test the card.
555-233-119
SAVE TRANSLATION
Command Completion Status
Success
to save recorded announcements.
Enter
SAVE ANNOUNCEMENTS
Command Completion Status
Success
''Translation Card Errors'' on page
Error Code
0
Error Code
0
71.
Issue 5 October 2002
71