Avaya DEFINITY Server CSI Maintenance Manual page 62

Maintenance for CSI systems
Testing a Login
1. Enter your login name at the login prompt.
After the user enters the correct login name and password and the login is
administered correctly, the command line interface appears.
2. Turn on the administration terminal.
3. At the login prompt, type your login name and press
4. In the password prompt, type your password and press
For security reasons, the password is not displayed as you type it. The
system verifies that a valid login and password name were entered. If an
invalid login or password name was entered, the screen displays:
login incorrect:, and you must repeat the procedure.
If the system recognizes the login and password name, verify that the
screen displays the software version.
5. For your terminal type, complete one of the following:
a. If the terminal is a 513 BCT, press
b. If the terminal is a 610 BCT or a 615 MT that has a 513 emulation
c. If the terminal is a 610 BCT or a 615 MT that does not have a 513
d. If the terminal is any other of the types listed, enter the terminal type
6. You can deactivate INADS alarm origination whenever you log in as craft.
After you supply the terminal type information requested, the following
appears if alarm origination is activated on the Maintenance
System-Parameters screen:
The default answer is yes. If you do not wish to suppress alarm origination,
enter n. The test inads-link command works regardless of whether you
have overridden INADS alarm origination.
7. Verify that the screen displays: enter command:
Enter a command, or press
62
Issue 5 October 2002
the system default terminal.
cartridge, press .
Enter
emulation cartridge, enter 4410 and press
and press .
Enter
NOTE:
Unless you are in a special situation, please reduce unnecessary
trouble tickets by always answering y to the Suppress Alarm
Origination: [y] prompt.
. The 513 in brackets [513] is
Enter
Enter
to list permissible commands.
Help
. password:
Enter
.
Enter
.
555-233-119