Chapter 2: Site Preparation; Recommended Tools And Supplies; Recommended Test Equipment - Avaya S8730 Maintaining Manual

Chapter 2: Site preparation

Recommended tools and supplies

• #2 crosspoint (Phillips) screwdriver
• A medium-width flat-blade screwdriver
• T-15 Torx screwdriver (attached to rear of server)
• A small pair of needlenose pliers
• A small pair of wire cutters
• Masking tape or felt-tip pen for marking mounting holes
• A volt/ohm meter

Recommended test equipment

Verify that the following test equipment will be available when installation and configuration of
the system is complete:
• At least two telephones connected through the switch or private branch exchange
(PBX). The telephones must be of the same type as most of the telephones the
customer plans to use on the system.
• Access to a fax machine if fax messaging will be installed on the system.
Maintaining the Avaya S8730 Server for Modular Messaging
- Preferably the test telephones will have a data display for testing integration
and the Find Me and Call Me features.
- If the message waiting indicator (MWI) for the system is a lamp, the test
telephone must be equipped with a lamp. If the MWI is a stutter tone, the
telephone must be able to provide the stutter notification.
- Place the test telephone so you can easily see the monitor while using the
telephones.
June 2009 11