Alcatel OmniAccess Wireless System 2.1 Product Manual page 535

•
ZA (South Africa) which allows 802.11a and 802.11b/g.
Note that both 802.11a and 802.11b/g bands must be disabled in order to change the country code.
Command Buttons
•
Apply: Data is sent to the Alcatel OmniAccess Switch or Appliance and made to take effect, but
not preserved across a power cycle; these parameters are stored temporarily in volatile RAM.
•
Help: Request that the help page be displayed in a new browser window.
Timers
Timers
Use WIRELESS/Timers to navigate to this page.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
wireless timers.
The timers listed on this page are described in the following table.
Table -
Timer Descriptions
Timer
802.11 Authentication Response Timeout
Command Buttons
•
Apply: Data is sent to the Alcatel OmniAccess Switch or Appliance and made to take effect, but
not preserved across a power cycle; these parameters are stored temporarily in volatile RAM.
•
Help: Request that the help page be displayed in a new browser window.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 86
Description
Configures 802.11 authentication response timeout in
seconds.
Timers