Show Advanced Timers; Show Ap Commands; Show Ap Auto-Rf - Alcatel OmniAccess Wireless System 2.1 Product Manual

Examples
Related Commands

show advanced timers

To display the advanced mobility anchor, authentication response, and Rogue AP entry timers, use the
show advanced timers command.
show advanced timers
>
Syntax
Defaults
Examples
Related Commands

SHOW AP COMMANDS

Use the following show ap commands:
•

show ap auto-rf

•
show ap config
•
show ap stats
•
show ap summary
•
show ap wlan
show ap auto-rf
show ap auto-rf
To display the auto-rf settings for an OmniAccess AP 1200 or 1250, use the show ap auto-rf command.
show ap auto-rf <802.11a/802.11b> <AP name>
>
Syntax
Defaults
Examples
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 16
>show advanced statistics
Switch port statistics...........................
config advanced timers auth-timeout, config advanced timers rogue-ap
show advanced timers
show
advanced
timers
Shown below in examples.
>show advanced timers
Authentication Response Timeout (seconds)...... 10
Rogue Entry Timeout (seconds).................. 1200
AP Heart Beat Timeout (seconds)................ 30
AP Discovery Timeout (seconds)................. 10
config advanced timers auth-timeout, config advanced timers rogue-ap
show ap
show
ap auto-rf
<802.11a/802.11b>
<AP name>
(none)
>show ap auto-rf 802.11a AP1
Number Of Slots.................................. 2
Rad Name......................................... AP03
MAC Address...................................... 00:0b:85:01:18:b7
Radio Type..................................... RADIO_TYPE_80211a
Noise Information
Noise Profile................................ PASSED
Channel 36...................................
Display configurations.
Advanced parameters.
Advanced system timers.
Display configurations.
OmniAccess Radio.
802.11a or 802.11b setting.
OmniAccess AP 1200 or 1250 name.
show advanced timers
Enabled
-88 dBm