Configure <Ipaddr> > Local Net Users > Add From Template; Configure Access Control List > New Template; Configure Access Control List > Template <Listname> Rule - Alcatel OmniAccess Wireless System 2.1 Product Manual

•
Cancel
Configure <IPaddr> > Local Net Users > Add From Template
Use CONFIGURE/Switches and click an IP address under the IP Address column, on the left sidebar
menu, select Security and click Local Net Users, from the Select a command pulldown select Add
Local Net User to access this page.
This page allows you to add information from a template for Local Net Users.
•
Select a template to create from (pulldown list of available templates).
To create a New Template for Local Authentication
Refer to
creation page.
Command Buttons
•
Create: Add a new Local Net User to the ACS database and display
•
Cancel
General Template Information (read-only)
•
User Name (read only): User-defined identification.
•
Number of Switches applied to (read only).
•
Password and Confirm Password: Local Net User password.
•
SSID: Service Set Identifier being broadcast by the OmniAccess Radio, or Any SSID.
•
Description: Optional user-defined description.
Configure Access Control List > New Template
Use CONFIGURE/Templates and from the left sidebar menu, select Security/Access Control Lists,
under the Select a command pulldown, select Add Template, click GO to access this page.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support ACLs.
This page allows you to add a new access control list (ACL) template name.
•
Add a new Access Control List Template Name.
Command Buttons
•
Save: Add the new ACL name to the ACS database and go to the
Template.
•
Cancel
Configure Access Control List > Template <listname> Rule
Use CONFIGURE/Templates and from the left sidebar menu, select Security/Access Control Lists,
click a list item under ACL Name, from the Select a command pulldown, select Add New Rule or click
an item under Seq# to access this page.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support ACLs.
This page allows you to add a new rule or edit an existing rule in an access control list template.
11/5/04 Configure <IPaddr> > Local Net Users > Add From Template
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 125
Configure Local Net Users > New
click here
to get redirected to template
Template.
Configure Access Control List > New Template
Configure Access Control List
Configure Access Control List > Template <listname> Rule
Configure <IPaddr> > Local Net Users > Add From Template
Configure Local Net Users.