Table -
Authentication Server Addressing
Parameter
Server Index
Server Address
Admin Status
Table -
Authentication Server Statistics
Parameter
Msg Round Trip Time
First Requests
Retry Requests
Accept Responses
Reject Responses
Challenge Responses
Malformed Messages
Bad Authenticator Msgs
Pending Requests
Timeout Requests
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 29
Access priority number for RADIUS servers. Up to four servers can be
configured, and Alcatel OmniAccess Switch or Appliance polling of the
servers starts with Index 1 first, Index 2 second, etc. Index number is
based on the order in which the servers were added to the Alcatel
OmniAccess Switch or Appliance.
IP address of the RADIUS server.
State of the server.
The time interval (in hundredths of a second) between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched it
from this RADIUS authentication server.
The number of RADIUS Access-Request packets sent to this server. This
does not include retransmissions.
The number of RADIUS Authentication-Request packets retransmitted to
this RADIUS authentication server.
The number of RADIUS Access-Accept packets (valid or invalid) received
from this server.
The number of RADIUS Access-Reject packets (valid or invalid) received
from this server.
The number of RADIUS Access-Challenge packets (valid or invalid)
received from this server.
The number of malformed RADIUS Access-Response packets received
from this server. Malformed packets include packets with an invalid
length. Bad authenticators or Signature attributes or unknown types are
not included as malformed access responses.
The number of RADIUS Access-Response packets containing invalid
authenticators or Signature attributes received from this server.
The number of RADIUS Access-Request packets destined for this server
that have not yet timed out or received a response. This variable is incre-
mented when an Access-Request is sent and decremented due to receipt
of an Access-Accept, Access-Reject or Access-Challenge, a timeout, or
retransmission.
The number of authentication timeouts to this server. After a timeout the
client may retry to the same server, send to a different server, or give
up. A retry to the same server is counted as a retransmit as well as a
timeout. A send to a different server is counted as a Request as well as a
timeout.
RADIUS Servers > Authentication Stats
Description
Description
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?
Questions and answers