Trusted Ap Policies; Rogue Policy - Alcatel OmniAccess Wireless System 2.1 Product Manual

•
Regenerate Certificate: Direct the Alcatel OmniAccess Operating System to internally
generate a new Web Authentication certificate.
•
Help: Request that the help page be displayed in a new browser window.

Trusted AP Policies

Use SECURITY/Wireless Protection Policies/Trusted AP Policies to navigate to this page.
This page allows you to select and view trusted AP policy information as shown in the following table.
Table -
Trusted AP Policies Parameters
Parameter
Action to take on
mis-configured APs
Enforced Encryption policy
Enforced preample policy
Enforced radio type policy
Valid SSID
Alert if Trusteed AP is missing
Expiration Timeout for Trusted
AP Entries (seconds)
Command Buttons
•
<Back: Return to the previous window.
•
Apply: Data is sent to the Alcatel OmniAccess Switch or Appliance and made to take effect, but
not preserved across a power cycle; these parameters are stored temporarily in volatile RAM.
•
Help: Request that the help page be displayed in a new browser window.

Rogue Policy

Rogue Policies
Use SECURITY/Wireless Protection Policies/Rogue Policies to navigate to this page.
This page allows you to select global parameters for rogue access point detection and containment.
•
Enable Rogue Location Discovery Protocol to have the Alcatel OmniAccess Wireless System
automatically detect rogue access points on your wired network. Enabling this feature allows
the Automatically contain rogues on my network function to contain only the rogue access
points on your wired network, while ignoring the rogue access points on other floors or across
the street.
•
For Detect rogues on my wired network, select Alarm Only or Contain.
•
For Detect rouges advertising my SSID, select Alarm Only or Contain.
•
For Detect Ad-Hoc Networks, select Alarm Only or Contain
•
Expiration Timeout for Rogue AP Entries: The number of seconds an automatically-contained
rogue access point will continue to be contained.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 103
Trusted AP Policies
Choices are: Alarm only or Contain
Choices are: None, open, WEP, or WPA/802.11i
Choices are: None, short, or long.
Choices are: None, 802.11b only, 802.11a only, or 802.11b/g
Only
Valid Service Set Identifier. Enable or Disable checkbox
Enable or Disable checkbox
Value in seconds
Description
Trusted AP Policies