Alcatel OmniAccess Wireless System 2.1 Product Manual page 954

You can now minimize the Start ACS Service DOS window, and close or view the current ACS
Software status in the ACS Server Status window.
Note that the ACS Server Status window is updated about every five seconds. When the ACS
Server Status window displays the
service is ready to host ACS Web Interfaces.
Note:
you want to view the current ACS Software status, from the Windows START button,
select the Programs menu, and select Alcatel OmniAccess Control System 2.1/
Check Server Status to view the ACS Server Status window again.
If desired, continue with the
OmniAccess Control System Software in the Alcatel OmniAccess Wireless Product Guide.
Stopping the ACS Software Application
You can stop th e ACS Software application at any time.
Note:
Software, the ACS Web Interface sessions will stop functioning.
•
From the Windows START button, select the Programs menu, and select Alcatel
OmniAccess Control System 2.1/Stop ACS Server.
•
The Stop ACS Software window displays the
•
Press any key to complete the Stop ACS Software script.
You have shut down the ACS Software application. If desired, continue with the Alcatel OmniAccess
Wireless Product Guide.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide
ACS Software Server is Up
You can close the ACS Server Status window at any time, if you wish. When
Step 4: Starting and Stopping an ACS Web Interface
If there are any ACS Web Interfaces lo gged in when you stop the ACS
Step 3: Starting and Stopping the ACS Software
message, the ACS Software
Stopping the ACS Software Application
Press any key to continue
or Using the Alcatel
prompt.
7