Defaults
Examples
Related Commands
config wlan security ipsec authentication
To modify the IPSec security authentication protocol used on the wireless LAN, use the config wlan
security ipsec authentication command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
Use to change the authentication protocol for IPSec to:
- hmac-md5
- hmac-sha-1
- none
>config wlan security ipsec authentication [hmac-md5/hmac-sha-1/none] [<WLAN
id>/foreignAp]
Syntax
Defaults
Examples
Related Commands
config wlan security ipsec encryption
To modify the IPSec security encryption protocol used on the wireless LAN, use the config wlan security
ipsec encryption command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
>config wlan security ipsec encryption [3des/aes/des/none] [<WLAN id>/foreignAp]
Syntax
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 161
security
ipsec
enable/disable
<WLAN id>
foreignAp
N/A
>config wlan security IPSec enable foreignAp
show wlan
Enables IPSec HMAC-MD5 authentication.
Enables IPSec HMAC-SHA-1 authentication.
Disables IPSec authentication.
config
wlan
security
ipsec
authentication
[hmac-md5/hmac-
sha-1/none]
<WLAN id>
foreignAp
N/A
>config wlan security ipsec authentication hmac-sha-1 1
show wlan
config
wlan
security
config wlan security ipsec authentication
Security policy.
IPSec parameters.
Change state command.
WLAN identifier between 1 and 16.
Third-party access point WLAN 17.
config wlan security ipsec authentication
Configure parameters.
Wireless LAN parameters.
Security policy.
IPSec security.
Authentication parameter.
Authentication protocol.
WLAN identifier between 1 and 16.
Third-party access point WLAN 17.
config wlan security ipsec encryption
Configure parameters.
Wireless LAN parameters.
Security policy.
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?