Alcatel OmniAccess Wireless System 2.1 Product Manual page 596

Table -
Rogue Access Point AP Alarms (Continued)
Parameter
Rogue MAC Address
Vendor
Type
On Network
On 802.11a
On 802.11b
Date/Time
State
SSID
Select a command
Select one or more alarms by checking their respective checkboxes, selecting one of the following
commands, and clicking GO.
•
Assign to me: Assign the selected alarm(s) to the current user.
•
Unassign: Unassign the selected alarm(s).
•
Delete: Delete the selected alarm(s).
•
Clear: Clear the selected alarm(s).
•
Email Notification: Takes you to the
configure email notifications.
•
Set State to 'Unknown - Alert': Use this command to tag the rogue AP as the lowest threat,
continue monitoring the rogue AP, and to turn off Containment.
•
Set State to 'Known - Internal': Use this command to tag the rogue AP as internal, add it to the
known rogue APs list, and to turn off Containment.
•
Set State to 'Known - External': Use this command to tag the rogue AP as external, add it to
the known rogue APs list, and to turn off Containment.
•
1 AP Containment: Target the rogue access point for containment by one OmniAccess AP 1200
or 1250. (Lowest containment level.)
•
2 AP Containment: Target the rogue access point for containment by two OmniAccess AP
Access Points.
•
3 AP Containment: Target the rogue access point for containment by three OmniAccess AP
Access Points.
•
4 AP Containment: Target the rogue access point for containment by four OmniAccess AP
Access Points. (Highest containment level.)
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 17
Media Access Control address of the rogue APs. Refer to
Rogue AP - <vendor:MACaddr>.
Rogue AP vendor name, or Unknown.
Rogue AP type: AP or AD-HOC.
Whether or not this Rogue AP is on the same subnet as the detecting
Alcatel OmniAccess Switch or Appliance.
Whether or not this Rogue AP is broadcasting 802.11a.
Whether or not this Rogue AP is broadcasting 802.11b and/or 802.11g.
Date and time the alarm occurred.
State of the alarm: Alert, Known or Removed.
Service Set Identifier being broadcast by the rogue access point radio.
(Blank if SSID is not broadcast.)
Monitor All Alarms > Email Notification
Description
Monitor Rogue AP Alarms
Monitor Alarms >
page to view and