Using the Alcatel OmniAccess Control System Software
Refer to the following to start, stop, use, and manage ACS Software:
•
Starting and Stopping Windows ACS Software
•
Starting and Stopping Linux ACS Software
•
Starting and Stopping the ACS Web Interface
•
Configuring the ACS Database
•
Viewing System Status
•
Troubleshooting with ACS Software
•
Managing ACS Software and Database
Starting and Stopping Windows ACS Software
•
Starting ACS Software as a Windows Application
•
Starting ACS Software as a Windows Service
•
Stopping the ACS Software Windows Application
•
Stopping the ACS Software Windows Service
•
Checking the ACS Software Windows Service Status
Starting and Stopping Linux ACS Software
•
Starting the Linux ACS Software Application
•
Checking the Linux ACS Software Status
•
Stopping the Linux ACS Software Application
Starting and Stopping the ACS Web Interface
•
Starting an ACS Web Interface
•
Stopping an ACS Web Interface
Starting ACS Software as a Windows Application
When the ACS Software has been installed as an application, you can start the ACS Software applica-
tion at any time.
•
From the Windows START button, select the Programs menu, and click Alcatel OmniAccess
Control System 2.1/Start ACS Server.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 133
Using the Alcatel OmniAccess Control System Software
Starting and Stopping Windows ACS Software
Starting and Stopping Linux ACS Software
Starting and Stopping the ACS Web Interface
Starting ACS Software as a Windows Application
Using the Alcatel OmniAccess Control System Software
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?