Show Sessions; Show Serial; Show Snmpcommunity - Alcatel OmniAccess Wireless System 2.1 Product Manual

show serial

show serial
To a show the serial (Console) port configuration, use the show serial command.
>show serial
Syntax
Defaults
Examples
Related Commands

show sessions

show sessions
To a show the Console port login timeout and maximum number of simultaneous CLI sessions, use the
show sessions command.
>show sessions
Syntax
Defaults
Examples
Related Commands

show snmpcommunity

To a show the SNMP version 1/version 2c community configuration, use the show snmpcommunity
command.
>show snmpcommunity
Syntax
Defaults
Examples
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 47
show
serial
9600, 8, OFF, 1, (none)
>show serial
Serial Port Login Timeout (minutes)......... 0
Baud Rate................................... 9600
Character Size.............................. 8
Flow Control:............................... Disable
Stop Bits................................... 1
Parity Type:................................ none
config serial baudrate, config serial timeout
show
sessions
5 minutes, 5 sessions.
>show sessions
CLI Login Timeout (minutes)............ 0
Maximum Number of CLI Sessions......... 5
which indicates that the CLI sessions never time out, and that the Alcatel Omni-
Access Switch or Appliance can host up to five simultaneous CLI sessions.
config sessions maxsessions, config sessions timeout
show snmpcommunity
show
snmpcommunity
(none)
>show snmpcommunity
SNMP Community Name Client IP Address Client IP Mask
------------------- ----------------- ---------------- ----------- ------
********** 0.0.0.0
public 0.0.0.0
Display configurations.
Console serial port.
Display configurations.
CLI session limits.
Display configurations.
SNMP version 1/version 2c community configuration.
0.0.0.0
0.0.0.0
Access Mode Status
Read/Write Enable
Read Only Enable
show serial