Show Route Summary; Show Rogue Client Summary - Alcatel OmniAccess Wireless System 2.1 Product Manual

Related Commands

show rogue client summary

To display a summary of the rogue clients detected by the Alcatel OmniAccess Switch or Appliance, use
the show rogue client summary command.
>show rogue client summary
Syntax
Defaults
Examples
Related Commands

show route summary

To a show the routes assigned to the Alcatel OmniAccess Switch or Appliance Service port, use the
show route summary command.
>show route summary
Syntax
Defaults
Examples
Related Commands
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 44
Reported By
AP 1
Rogue Client MAC Address............... 00:0b:85:01:88:b0
Name................................... AP1
Radio Type............................. 802.11b
SSID................................... Chichen
Channel................................ 6
RSSI................................... -60 dBm
SNR.................................... 40 dB
show rogue client summary
show rogue client summary
show
rogue client
summary
(none)
>show rogue client summary
Rogue Client Location Discovery Protocol.........
RLDP Auto-Contain................................
MAC Address State
----------------- ------------ ----- -----------------------
00:02:6d:28:37:ab Alert
00:09:6b:54:23:90 Alert
00:0b:65:00:80:40 Alert
show rogue client detailed
show route summary
show route
summary
(none)
>show route summary
Number of Routes............................... 1
Destination Network
-------------------
193.122.17.3
config route
Display configurations.
Rogue client.
Summary information.
# APs Last Heard
1 Sat Aug
1 Sat Aug
1 Sat Aug
Command action
Summary information.
Genmask
-------------------
255.255.255.0
show rogue client summary
Disabled
Disabled
9 21:12:50 2004
9 21:12:50 2003
9 21:10:50 2003
Gateway
-------------------
172.99.3.89