Defaults
Examples
Related Commands
config wlan security ipsec ike lifetime
To modify the IPSec IKE timeout used on the wireless LAN, use the config wlan security ipsec ike
lifetime command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
>config wlan security ipsec ike lifetime [<WLAN id>/foreignAp] <group-id>
Syntax
Defaults
Examples
Related Commands
config wlan security ipsec ike phase1
To modify IPSec IKE Phase 1 used on the wireless LAN, use the config wlan security ipsec ike phase1
command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
>config wlan security ipsec ike phase1 [aggressive/main] [<WLAN id>/
foreignAp]
Syntax
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 163
ipsec
ike
dh-group
<WLAN id>
foreignAp
<group-id>
N/A
>config wlan security ipsec ike dh-group 1 1
show wlan
config
wlan
security
ipsec
ike
lifetime
<WLAN id>
foreignAp
<seconds>
N/A
>config wlan security ipsec ike lifetime 1 10
show wlan
config
wlan
security
ipsec
ike
phase1
config wlan security ipsec ike lifetime
IPSec security.
IKE protocol.
Diffie Hellman group parameter.
WLAN identifier between 1 and 16.
Third-party access point WLAN 17.
Group 1, 2 or 5
config wlan security ipsec ike lifetime
Configure parameters.
Wireless LAN parameters.
Security policy.
IPSec security.
IKE protocol.
IKE timeout.
WLAN identifier between 1 and 16.
Third-party access point WLAN 17.
Timeout in seconds
config wlan security ipsec ike phase1
Configure parameters.
Wireless LAN parameters.
Security policy.
IPSec security.
IKE protocol.
Phase 1 command.
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?