Configure Historically Known Rogue Ap > Add Rogue Ap; Configure Tftp Server > Add Tftp Server; Configure <Ipaddr> > Local Management Users > Add From Template - Alcatel OmniAccess Wireless System 2.1 Product Manual

Configure Historically Known Rogue AP > Add Rogue AP
Use CONFIGURE/Templates, from the left sidebar menu select Known Rogues, from the Select a
command pulldown, select Add Rogue AP to access this page.
This page allows you to add a Historically Known Rogue AP to the ACS database:
•
MAC address: IP Address of the rogue access point.
•
Status: Type of rogue access point: Internal, External.
•
Comment: Short user-determined comment.
•
Suppress Alarms checkbox: Check to suppress alarms from this rogue access point.
Command Buttons
•
Save
•
Cancel
Configure TFTP Server > Add TFTP Server
Use CONFIGURE/Templates, from the left sidebar menu select TFTP Servers, then from the Select
a command pulldown, select Add TFTP Server to access this page.
This page allows you to add a TFTP server to the ACS Server.
•
TFTP Server Name: User-defined name of the TFTP server.
•
IP Address: IP Address of the TFTP server.
Command Buttons
•
Save
•
Cancel
Configure <IPaddr> > Local Management Users > Add From Template
Use CONFIGURE/Switches, click an IP address under the IP Address column, on the left sidebar
menu select Management/Local Management Users, then select Add Local Management User
and click GO to access this page.
This page allows you to add a new local management user from an existing local management user
template.
•
Select a template to create from: (pulldown list of available templates).
Command Buttons
•
Create
•
Cancel
If not created yet,
To create a New Template for Local Management Users
to template creation
General
•
User Name (read only): Name of the user.
•
No of Switches Applied To (read only): Number of Alcatel OmniAccess Switches and Appliances
to which this template is applied.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 143
(Configure Local Management Users > New
Configure Historically Known Rogue AP > Add Rogue AP
Configure Historically Known Rogue AP > Add Rogue AP
Configure TFTP Server > Add TFTP Server
click here
Template)
Configure <IPaddr> > Local Management Users > Add From Template
to get redirected
page.