Defaults
Examples
Related Commands
config advanced 802.11a profile coverage
To set the OmniAccess AP 1200 or 1250 coverage threshold between 3 and 50 dB, use the config
advanced 802.11a profile coverage command.
>config advanced 802.11a profile coverage <global/OmniAccess AP 1200 or 1250>
<value>
Syntax
Defaults
Examples
Related Commands
config advanced 802.11a profile customize
To turn customizing on or off for an 802.11a OmniAccess AP 1200 or 1250 performance profile, use the
config advanced 802.11a profile customize command.
config advanced 802.11a profile customize <OmniAccess AP 1200 or 1250>
>
<on|off>
Syntax
Defaults
Examples
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 81
profile clients
global/<OmniAccess AP 1200 or 1250>global or OmniAccess AP 1200 or 1250
<value>
12 clients.
To set all OmniAccess AP 1200 or 1250 clients thresholds to 25 clients:
>config advanced 802.11a profile clients global 25
To set the AP1 clients threshold to 75 clients:
>config advanced 802.11a profile clients AP1 75
show advanced 802.11a profile, config advanced 802.11b profile clients
config
advanced 802.11a
profile coverage
global/<OmniAccess AP 1200 or 1250>global or OmniAccess AP 1200 or 1250
<value>
12 dB.
To set all OmniAccess AP 1200 or 1250 coverage thresholds to 30 dB:
>config advanced 802.11a profile coverage global 30
To set AP1 coverage thresholds to 50 dB:
>config advanced 802.11a profile coverage AP1 50
show advanced 802.11a profile, config advanced 802.11b profile coverage
config
advanced 802.11a
customize
OmniAccess AP 1200 or 1250OmniAccess AP 1200 or 1250.
on/off
Off.
To turn performance profile customization on for 802.11a OmniAccess AP 1200
or 1250 AP1:
config advanced 802.11a profile coverage
OmniAccess AP 1200 or 1250 Client profile
specific profile.
1 to 75 clients.
config advanced 802.11a profile coverage
Configure parameters.
Advanced 802.11a parameters.
OmniAccess AP 1200 or 1250 profile coverage
specific profile.
3 to 50 dB.
config advanced 802.11a profile customize
Configure parameters.
Advanced 802.11a parameters.
Performance profile.
Enable or disable.
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?