Alcatel OmniAccess Wireless System 2.1 Product Manual page 890

Non-Modification Statement
Use only the supplied internal antenna, or external antennas supplied by the manufacturer. Unautho-
rized antennas, modifications, or attachments could damage the badge and could violate FCC
regulations and void the user's authority to operate the equipment.
Deployment Statement
This product is certified for indoor deployment only. Do not install or use this product outdoors.
Industry Canada Required User Information for OmniAccess AP Access Points
Required User Information for OmniAccess AP Access Points
This device has been designed to operate with antennae having maximum gains of 7.8 dBi (2.4 GHz)
and 7.4 dBi (5 GHz).
Antennae having higher gains is strictly prohibited per regulations of Industry Canada. The required
antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not more than that required for successful
communication.
Safety Considerations
•
The 1200 and 1250 OmniAccess AP Access Points with or without external antenna ports are
only intended for installation in Environment A as defined in IEEE 802.3af. All interconnected
equipment must be contained within the same building including the interconnected
equipment's associated LAN connections.
•
For OAW-1200BGE, OAW-1250BGE, OAW-1200ABGE, OAW-1250ABGE OmniAccess AP Access
Points and Alcatel OmniAccess Remote Edge Access Points (OmniAccess 1200R APs) provided
with optional external antenna ports, make sure that all external antennas and their associated
wiring are located entirely indoors. The OmniAccess AP Access Points and OmniAccess 1200R
APs and their optional external antennas are not suitable for outdoor use.
•
MAKE SURE that plenum-mounted OmniAccess AP Access Points and OmniAccess 1200R APs
are powered using Power Over Ethernet (PoE) to comply with safety regulations.
•
External antennas are NOT to be used when installing OmniAccess AP Access Points and
OmniAccess 1200R APs in a plenum.
11/5/04 Industry Canada Required User Information for OmniAccess AP Access Points
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 25
Non-Modification Statement
Deployment Statement
Safety Considerations
Industry Canada