TFTP Server IP................................. xxx.xxx.xxx.xxx
TFTP Path...................................... <directory path>
TFTP Filename..................................... ALCATEL_2_1_60_0.aes
Are you sure you want to start? (y/n)
Transfer Canceled
>
•
To change the download settings, use the following:
transfer download mode tftp
>
transfer download datatype code
>
transfer download serverip <TFTP server IP address>
>
transfer download filename ALCATEL_<release_number>.aes
>
transfer download path <absolute TFTP server path to the update file>
>
Note:
address>, and the TFTP server automatically determines the path to the correct
directory.
•
In the CLI, use the transfer download start command to view the updated settings, and
answer 'y' to the prompt to confirm the current download settings and start the Alcatel
OmniAccess Operating System code download:
transfer download start
>
Mode........................................... TFTP
Data Type...................................... Code
TFTP Server IP................................. xxx.xxx.xxx.xxx
TFTP Path...................................... <directory path>
TFTP Filename.................................. ALCATEL_2_1_60_0.aes
Are you sure you want to start? (y/n)
TFTP Code transfer starting.
TFTP receive complete... extracting components.
Writing new bootloader to flash.
Making backup copy of RTOS.
Writing new RTOS to flash.
Making backup copy of Code.
Writing new Code to flash.
TFTP File transfer operation completed successfully.
Please restart the switch (reset system) for update to complete.
•
The Alcatel OmniAccess Switch or Appliance now has the code update in active volatile RAM,
but you must save the code update to non-volatile NVRAM and reboot the Alcatel OmniAccess
Switch or Appliance:
reset system
>
The system has unsaved changes.
Would you like to save them now? (y/n)
The Alcatel OmniAccess Switch or Appliance completes the bootup process as described in
Step 5: Performing Power On Self Test
Installation
Guide.
11/5/04
Updating the Alcatel OmniAccess Operating System Software
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 123
Some TFTP servers require only a forward slash "/" as the <TFTP server IP
n
y
y
in the
Alcatel OmniAccess Switch and Appliance Quick
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?