Http Configuration - Alcatel OmniAccess Wireless System 2.1 Product Manual

Table -
Client Status Code Descriptions and Meanings (Continued)
Client
Status
Code
7 probing
8 disabled
Command Buttons
•
Clear Log: Deletes all log entries. You are prompted for confirmation to delete the logs.
•
Help: Request that the help page be displayed in a new browser window.

HTTP Configuration

Use MANAGEMENT/HTTP to navigate to this page.
This page allows you to enable or disable Web Mode or Secure Web Mode.
•
HTTP Access: This is the HTTP Alcatel OmniAccess Switch Web Interface which is accessible
using a login and password. If you disable HTTP Web Mode, you need Secure Web Mode
enabled, or must use the CLI or Alcatel OmniAccess Control System Software interface to
configure the Alcatel OmniAccess Switch or Appliance. If you disable Web Mode and Secure
Web Mode, and must use the CLI interface to configure the Alcatel OmniAccess Switch or
Appliance.
•
HTTPS Access: This is the HTTPS Secure Shell (SSL) interface accessible using secure certif-
icate authentication (configured below). If you disable HTTPS Secure Web Mode, you need Web
Mode enabled or need to use the CLI or Alcatel OmniAccess Control System Software interface
to configure the Alcatel OmniAccess Switch or Appliance.
•
Current Certificate Information.
•
Download SSL Certificate: Use to download an SSL Web Admin Certificate from a local TFTP
server. Select the Download SSL Certificate checkbox to display the following entries:
Note:
Control System, because the ACS and the TFTP server use the same communication
port.
CAUTION:
can be from 512 bits, which is relatively insecure, through thousands of bits, which is
very secure. When you are obtaining a new certificate from a Certificate Authority
(such as the Microsoft CA), MAKE SURE the RSA key embedded in the certificate is
AT LEAST 768 Bits.
-
Server IP Address: The IP address of the local TFTP server.
-
Maximum Retries: Maximum number of times each download can be attempted.
-
Timeout: The amount of time allowed for each download.
-
Certificate File Path: Usually either \ or /, as most TFTP servers automatically determine
the path to their default file location. Otherwise, the TFTP server absolute file path.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 116
Description
HTTP Configuration
The TFTP server cannot run on the same computer as the Alcatel OmniAccess
Each certificate has a variable-length embedded RSA Key. The RSA key
Meaning
client not associated or authorized yet
automatically disabled by the Alcatel OmniAccess
Operating System for an operator-defined time
HTTP Configuration