Adding Floor Plans To A Campus Building - Alcatel OmniAccess Wireless System 2.1 Product Manual

Campus map. Note that there will be a hyperlink associated with the Building Name or
Outdoor Area.
•
Repeat this section for any remaining Outdoor Areas.
When you have completed this section for all Outdoor Areas, continue with
Access Control System

Adding Floor Plans to a Campus Building

Once you have added a Building to a Campus as described in
add individual floor plan and basement maps to the Building. Proceed with the following:
•
If not already done, save your floor plan map(s) in .FPE, .PNG, .JPG, or .GIF format. They can
be any size, as ACS automatically resizes the map(s) to fit in its working areas.
Note:
corresponding .PNG, .JPG, or .GIF format floor plan map. Importing the .PNG, .JPG,
or .GIF format floor plan map allows ACS to correctly display the floorplan, and
importing the .FPE floor plan map allows ACS to properly adjust the RF signal
strengths as modified by the walls and other RF obstructions.
•
Browse to and import the map(s) from anywhere in your file system.
•
Select the Monitor Tab.
•
Click Maps to have ACS display the Maps page.
•
In the Maps Page, select the desired Campus.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 155
Software.
When you are importing a .FPE floor plan map, you will also need to import a
Adding Floor Plans to a Campus Building
Adding a Building to a
Configuring the ACS Database
Using the Alcatel Omni-
Campus, you can